Supero C2SBM-Q, Руководство пользователя

Страница: 68 / 95

4-16
C2SBM-Q User's Manual
Enable Master
This setting allows you to enable the selected device as the PCI bus master.
The options are
Enabled and Disabled.
Latency Timer
This setting allows you to set the clock rate for Bus Master. A high-priority, high-
throughout device may benefit from a greater clock rate. The options are Default ,
0020h, 0040h, 0060h, 0080h, 00A0h, 00C0h, and 00E0h. For Unix, Novelle and
other Operating Systems, please select the option: other. If a drive fails after
the installation of a new software, you may want to change this setting and try
again. A different OS requires a different Bus Master clock rate
.

I/O Device Configuration
Access the submenu to make changes to the following settings.
KBC Clock Input
This setting allows you to select the clock frequency for the Keyboard Controller.
The options are 6MHz, 8MHz,
12MHz, and 16MHz.
Serial Port A
This setting allows you to decide how the system controls Serial Port A. The options
are
Enabled (user defined), Disabled, and Auto (BIOS- or OS-controlled).
Base I/O Address
This setting allows you to select the base I/O address for Serial Port A. The options
are
3F8 , 2F8, 3E8, and 2E8.
Interrupt
This setting allows you to select the IRQ (interrupt request) for Serial Port A. The
options are IRQ3 and
IRQ4 .
Serial Port B
This setting allows you to decide how the system controls Serial Port B. The options
are
Enabled (user defined), Disabled, Auto (BIOS controlled) and OS Controlled.
Mode
This setting allows you to set the type of device that will be connected to Serial
Port B. The options are
Normal and IR (for an infrared device).
Base I/O Address
This setting allows you to select the base I/O address for Serial Port B. The options
are 3F8,
2F8 , 3E8 and 2E8.