Chapter 3: Software Application and Usage
3-35
f. Event Log
1. Event Log:
Click on this function key to activate its submenu. This feature al-
lows you to set Event Log Targets and Event Log Assignment.
2. Event Log Targets:
This section allows you to manually set the event log tar-
gets and settings.
3. List Logging Enabled:
Check this box to activate the event-logging list. To
show the event log list, click on "Event Log" on the "Maintenance" page. (*The
maximum number of log list entries is 1,000 events. Every entry that exceeds
this limit will automatically override the oldest one in the list. If the reset button is
pressed, all logging information will be saved; however, all logging data will be lost
if hard reset is performed or the system loses power.)
4. Entries Shown Per Page:
Enter the number of entries you want to display on a
page.
5. Clear Internal Log:
Click this icon to clear internal event log from the memory.
6. NFS Logging Enable:
Click this box to enable NFS Logging which will create a
Network File System (NFS) for the event logging data to be written into.
7. NFS Server:
Enter the IP Address of the NFS Server.
8. NFS Share:
Enter the path of the Network File System in which the event log-
ging data is stored.
9. NFS Log File:
Enter the fi lename of the Network File System in which the event
logging data is stored.
10. SMTP Logging Enable:
Check this box to enable the function of SMTP
(Simple Mail Transfer Protocol) logging.
11. SMTP Server:
Enter the IP Address for the SMTP Server.
12. Receiver Email Address:
Enter the email address that the SMTP event log-
ging data will be sent to.
13. Sender Email Address:
Enter the email address from which the SMTP event
logging data is sent.
14. SNMP Logging Enable:
Check this box to enable the function of SNMP
(Simple Network Management Protocol) logging.
15. Destination IP:
Enter the IP address where the SNMP trap will be sent to.
16. Community:
Enter the name of the community if the receiver requires a com-
munity string.
17. Click here to view the Supermicro Daughter Card SNMP MIB:
Click this link
to see the SMLP card SNMP MIB.
18. Event Log Assignments:
This window allows you to specify the types and the
destination for the event logging.
