Chapter 3: Software Application and Usage
3-25
Home
Console
Logout
Remote Control
KVM Console
Remote Power
Virtual Media
Floppy Disk
CD-ROM Image
Drive Redirection
Options
System Health
Chassis Control
Monitor Sensors
System Event Log
Alert Settings
User Management
Change Password
Users & Groups
Permissions
KVM Settings
User Console
Keyboard/Mouse
Device Settings
Network
Dynamic DNS
Security
Certificate
Date/Time
Event Log
SNMP Settings
Maintenance
Device Information
Event Log
Update Firmware
Unit Reset
Network Basic Settings
IP auto configuration
Preferred host name (DHCP only)
*
IP address
Subnet mask
*
Gateway IP address
Primary DNS server IP address
*
Secondary DNS server IP address
*
Network Miscellaneous Settings
Remote Console & HTTPS port
*
HTTP port
*
SSH port
*
Bandwidth Limit
kbit/s
*
Enable SSH access
*
Disable Setup Protocol
*
LAN Interface Settings
Current LAN interface parameters: autonegotiation on, 100 Mbps, full duplex, link ok
LAN interface speed
*
LAN interface duplex mode
*
* Stored value is equal to the default.
None
192.168.1.200
255.255.255.0
192.168.1.1
443
80
22
Autodetect
Autodetect
1
2
3
4
5
6
7
8
9
3.2.6. Device Settings
Click on the Device Settings icon on the Home Page to activate its submenus:
Network, Dynamic DNS, Security, Certifi cate, Date/Time, Event Log and SNMP
Settings as listed below.
Device Settings: Network
16
17
18
19
20
15
10
12
111
13
14
a. Network
1. Device Settings:
Click on the Device Settings icon to activate its submenus:
Network, Dynamic DNS, Security, Certifi cate, Date/Time, Event Log and SNMP
Settings.
2. Network:
Click on this function key to activate the Network submenu to confi g-
ure the following settings: Network Basic Settings, Network Miscellaneous Settings
and LAN Interface Settings.
a. Network
