Chapter 4: BIOS
85
Bootup NumLock State
Use this feature to set the Power-on state for the <Numlock> key. The options are
On
and Off.
Wait For 'F1' If Error
Select Enabled to force the system to wait until the <F1> key is pressed if an error occurs.
The options are
Disabled
and Enabled.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this feature
is set to Immediate, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at bootup
immediately and allow the drives that are attached to these host adaptors to function as
bootable disks. If this feature is set to Postponed, the ROM BIOS of the host adaptors will
not capture Interrupt 19 immediately to allow the drives attached to these adaptors to function
as bootable devices at bootup. The options are
Immediate
and Postponed.
Re-try Boot
When EFI Boot (Extensible Firmware Interface Boot) is selected, the system BIOS will
automatically reboot the system from an EFI boot device after an initial boot failure. Select
Legacy Boot to allow the BIOS to automatically reboot the system from a Legacy boot device
after an initial boot failure. The options are
Disabled
, Legacy Boot, and EFI Boot.
