Super X12DPG-AR User's Manual
86
Power Configuration
Watch Dog Function
Select Enabled to allow the Watch Dog timer to reboot the system when it is inactive for more
than 5 minutes. The options are
Disabled
and Enabled
.
If this feature is set to Enabled, the following feature will display:
Watch Dog Action (Available when "Watch Dog Function" is set to Enabled.)
This feature allows the user to determine how the watch dog function can be triggered. The
options are
Reset
and NMI
.
Front USB Port(s)
Select Enabled to allow the specific type of USB devices to be used in the front USB ports.
Select Enabled (Dynamic) to allow or disallow this particular type of USB devices to be used
in the front USB ports without rebooting the system. The options are
Enabled
, Disabled, and
Enabled (Dynamic).
Rear USB Port(s)
Select Enabled to allow the specific type of USB devices to be used in the rear USB ports.
Select Enabled (Dynamic) to allow or disallow this particular type of USB devices to be used
in the rear USB ports without rebooting the system. The options are
Enabled
, Disabled, and
Enabled (Dynamic).
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power Off for the system
power to remain off after a power loss. Select Power On for the system power to be turned
on after a power loss. Select Last State to allow the system to resume its last power state
before a power loss. The options are Power On, Stay Off, and
Last State
.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select
4 Seconds Override to power off the system after pressing and holding the power button for
4 seconds or longer. Select Instant Off to instantly power off the system as soon as the user
presses the power button. The options are
Instant Off
and 4 Seconds Override
.
