Supermicro X11QPH+, Руководство пользователя

Страница: 95 / 218

Chapter 4: UEFI BIOS
95
Con fi gure sSATA as (Available when sSATA Controller is set to Enable)
Select AHCI to con fi gure an sSATA drive speci fi ed by the user as an AHCI drive. Select RAID
to con fi gure an sSATA drive speci fi ed by the user as a RAID drive. The options are AHCI
and RAID.
SATA HDD Unlock (Available when sSATA Controller is set to Enable)
Select Enable to unlock sSATA HDD password in the OS. The options are Enable and Disable.
SATA/sSATA RAID Boot Select (Available when Con fi gure sSATA as is set to RAID)
This feature allows the user to decide which controller should be used to boot the system.
The options are None, SATA Controller,
sSATA Controller , and Both.
Aggressive Link Power Management
When this feature is set to Enable, the sSATA AHCI controller manages the power use of the
sSATA link. The controller will put the link in a low power mode during an extended period of
I/O inactivity, and will return the link to an active state when I/O activity resumes. The options
are
Disable and Enable.
sSATA RAID Option ROM/UEFI Driver (Available when Con fi gure sSATA as is set to
RAID)
Select EFI to load the EFI driver for system boot. Select Legacy to load a legacy driver for
system boot. The options are Disable, EFI, and
Legacy .
sSATA Port 0 - sSATA Port 5
Hot Plug
Select Enable to support Hot-plugging for the device installed on an sSATA port speci fi ed
by the user, which will allow the user to replace the device installed in the slot without
shutting down the system. The options are
Enable and Disabled.
Spin Up Device
This setting allows the SATA device installed on the SATA port speci fi ed by the user to
start a COMRESET initialization when an edge is detected from 0 to 1. The options are
Enable and
Disable .
sSATA Device Type
Use this feature to specify if the device installed on the sSATA port speci fi ed by the user
should be connected to a Solid State drive or a Hard Disk Drive. The options are Hard
Disk Drive and Solid State Drive.

PCIe/PCI/PnP Con fi guration
Note: PCIe/PCI/PnP Con fi guration settings may differ depending on the PCI-E devices
installed on the motherboard.