Supermicro X10QRH+, Руководство пользователя

Страница: 99 / 131

Chapter 4: AMI BIOS
4-31
Serial ATA Port 0 ~ Port 5 Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to start a COMRE-
SET initialization to the device. The options are Enabled and
Disabled .
Serial ATA Port 0 ~ Port 5 SATA Device Type
Use this item to specify if the SATA port speci fi ed by the user should be con-
nected to a Solid State drive or a Hard Disk Drive. The options are Hard Disk
Drive and Solid State Drive.

sSATA Con fi guration
When this submenu is selected, AMI BIOS automatically detects the presence of
the SATA devices that are supported by the PCH-sSATA controller and displays
the following items:
sSATA Controller
This item enables or disables the onboard SATA controller supported by the Intel
PCH-sSATA controller. The options are
Enabled and Disabled.
Con fi gure sSATA as
Select IDE to con fi gure an sSATA drive speci fi ed by the user as an IDE drive. Select
AHCI to con fi gure an sSATA drive speci fi ed by the user as an AHCI drive. Select
RAID to con fi gure an sSATA drive speci fi ed by the user as a RAID drive. The op-
tions are IDE, AHCI , and RAID.
*If the item above "Con fi gure sSATA as" is set to AHCI, the following items will
display:
Support Aggressive Link Power Management
When this item is set to Enabled, the SATA AHCI controller manages the power
usage of the SATA link. The controller will put the link to a low power state when
the I/O is inactive for an extended period of time, and the power state will return
to normal when the I/O becomes active. The options are
Enabled and Disabled.
sSATA Port 0~ Port 3
This item displays the information detected on the installed on the sSATA port.
speci
fi ed by the user.
•
Model number of drive and capacity
•
Software Preserve Support