Supermicro X10QRH+, Руководство пользователя

Страница: 97 / 131

Chapter 4: AMI BIOS
4-29
*If the item above "Con fi gure SATA as" is set to AHCI, the following items will
display :
Support Aggressive Link Power Management
When this item is set to Enabled, the SATA AHCI controller manages the power
usage of the SATA link. The controller will put the link to a low power state when
the I/O is inactive for an extended period of time, and the power state will return
to normal when the I/O becomes active. The options are
Enabled and Disabled.
SATA Port 0~ Port 5
This item displays the information detected on the installed SATA drive on the
particular SATA port.
•
Model number of drive and capacity
•
Software Preserve Support
SATA Port 0~ Port 5
Select Enabled to enable a SATA port speci fi ed by the user. The options are
Disabled and Enabled .
SATA Port 0 ~ Port 5 Hot Plug
Select Enabled to enable hot-plugging support for a port speci fi ed by the user,
which will allow the user to replace a SATA disk drive installed on this port without
shutting down the system. The options are
Enabled and Disabled.
SATA Port 0 ~ Port 5 Spin Up Device
On an edge detect from 0 to 1, select Enabled to allow the PCH to initialize the
device. The options are Enabled and
Disabled .
SATA Port 0 ~ Port 5 SATA Device Type
Use this item to specify if the SATA port speci fi ed by the user should be con-
nected to a Solid State drive or a Hard Disk Drive. The options are Hard Disk
Drive and Solid State Drive.
*If the item above "Con fi gure SATA as" is set to IDE, the following items will
display:
Serial ATA Port 0~ Port 5
This item indicates that a SATA port speci fi ed by the user is installed (present)
or not.