Supermicro X10QRH+, Руководство пользователя

Страница: 13 / 131

Chapter 1: Overview
1-5
Motherboard Jumpers
Jumper Description Default Setting
J13 Power-Fail Trigger Thermal Throttling Enable Pins 2-3 (Enabled)
JBT1 Clear CMOS/Reset BIOS Con fi guration See Chapter 2
JPG1 VGA Enable Pins 1-2 (Enabled)
JPME2 Manufacture (ME) Mode Select Pins 1-2 (Normal)
JPT1 Trusted-Platform Module (TPM) Enable Pins 1-2 (Enabled)
JWD1 Watch Dog Pins 1-2 (Reset)
Motherboard Connectors
Connector Description
Battery (JBAT1) Onboard CMOS battery (See the Note on P. 1-3.)
COM1 Backplane COM port
FAN1-FAN10 System cooling fan headers (FAN1-FAN10)
J3/J12 SMC-proprietary main power connection headers
JF1 Front panel control header
JIPMB1 4-pin external BMC I
2
C header (for an IPMI Card)
JL1 Chassis intrusion header
JNVI 2 C3/4 System Management Bus (SMB) for non-volatile memory
headers (JP12/JP11)
JPWR1-3 8-pin power connectors 1-3 for backplane use
JPWR4-7 8-pin power connectors 4/5/6/7 used for GPU devices
JSD1/JSD2 SATA DOM (Disk_On_Module) power connectors
JSTBY1 Standby power header
JTPM1 TPM (Trusted Platform Module)/Port 80 header
(IPMI) LAN IPMI_dedicated LAN
I-SATA0-3 I-SATA 0-3 connections supported by the Intel PCH
I-SATA4/5 I-SATA 4/5 connectors with power pins built-in with support of
SuperDOMs (Devices-on-Module)
S-SATA0-3 S-SATA 0-3 connections supported by the Intel PCH
(CPU3) Slot1 PCI-E 3.0 x16 Slot supported by CPU3 (used for SMC-
proprietary add-on cards)
(CPU4) Slot2 PCI-E 3.0 x16 Slot supported by CPU4 (used for SMC-
proprietary add-on cards)
SP1 Internal buzzer/speaker
SXB2 PCI-E 3.0 x8 in x16 slot supported by CPU1
SXB1A/1B/1C PCI-E 3.0 x32 slot supported by CPU1 (used for SMC-
proprietary riser cards)