Supermicro X10QRH+, Руководство пользователя

Страница: 67 / 131

3-8
Super Motherboard User’s Manual
Question: How do I update my BIOS under UEFI Shell?
Note: We do not recommend that you update your BIOS if you are not
experiencing a BIOS-related problem. If you need to update your BIOS,
please follow the steps below to properly update your BIOS under UEFI
Shell.
1. Download and save the BIOS update package to your computer
2. Extract the fi les from the UEFI folder of the BIOS package to a USB stick.
Note: The USB stick doesn't have to be bootable; however, it has to be
formatted with the FAT/FAT32 fi le system.
3. Insert the USB stick into a USB port, boot to the UEFI Built-In Shell, and type
the following commands to start the BIOS update:
Shell> fs0:
fs0:\> cd UEFI
fs0:\UEFI> fl ash.nsh BIOSname#.###
4. The FLASH.NSH script will compare the Flash Descriptor Table (FDT) code in
the new BIOS with the existing one in the motherboard:
a. If a different FDT is found
•
A new fi le, STARTUP.NSH, will be created, and the system will automatically
reboot in 10 seconds without you pressing any key. BIOS will be updated after
the system reboots.
•
You can also press <Y> to force an immediate system reboot to shorten the
process. During system reboot, press the <F11> key to invoke the boot menu
and boot into the build-in UEFI Shell. Your BIOS will be updated automatically.
b. If the FDT is the same
•
BIOS update will be immediately performed without a system reboot initiated.
Warning : Do not shut down or reset the system while updating the BIOS to prevent
possible system boot failure!)
5. Perform an A/C power cycle after the message indicating the BIOS update
has completed.
6. Go to the BIOS setup utility, and restore the BIOS settings.