Supermicro SuperWorkstation 5039C-T Скачать руководство пользователя страница 81

Страница: 81 / 111

Chapter 6: BIOS

6.7 Save & Exit

Use this tab page to configure Save & Exit settings.

Discard Changes and Reset

This option will save the changes that have been made and will reboot the system.

Save Changes and Reset

This option will save the changes that have been made and will reboot the system.

Save Changes

This option will save the changes but will remain in setup mode.

Discard Changes

This option will discard the changes but will remain in setup mode.

Restore Defaults

This option will load the factory-stored optimized defaults and remain in setup mode.

Save as User Defaults

This option will save the changes as user-specified defaults and remain in setup mode.

Restore User Defaults

This option will load previously saved user-specified defaults and remain in setup mode.

Содержание SuperWorkstation 5039C-T
















































































































Результаты поиска

Содержание SuperWorkstation 5039C-T

Отзывы:

Supermicro SuperWorkstation 5039C-T, Руководство пользователя, Страница: 81 / 111

Результаты поиска

Содержание SuperWorkstation 5039C-T

Отзывы: