Chapter 6: BIOS
69
the parity bit is set to 0, and the number of 1's in data bits is odd. Select None if you do
not want to send a parity bit with your data bits in transmission. Select Mark to add a mark
as a parity bit to be sent along with the data bits. Select Space to add a Space as a parity
bit to be sent with your data bits. The options are
None
, Even, Odd, M
ark, and Space.
AMT SOL Stop Bits
A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for standard serial
data communication. Select 2 Stop Bits if slower devices are used. The
options are
1
o
r 2.
AMT SOL Flow Control
Use this feature to set the flow control for Console Redirection to prevent data loss caused
by buffer overflow. Send a "Stop" signal to stop sending data when the receiving buffer
is full. Send a "Start" signal to start sending data when the receiving buffer is empty. The
options a
re
None
or Hardware R
TS/CTS.
AMT SOL VT-UTF8 Combo Key Support
Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100 terminals.
The options are Unchecke
d (Disabled) or
Checked
(E
nabled).
AMT SOL Recorder Mode
Select Enabled to capture the data displayed on a terminal and send it as text messages
to a remote server. The options are
Unchecked
(Disabled) or C
hecked (Enabled).
AMT SOL Resolution 100x31
Select Enabled for extended-terminal resolution support. The options are Unchecked
(Disa
bled) or
Checked
(Enab
led).
AMT SOL Legacy OS Redirection Resolution
Use this feature to select the number of rows and columns used in Console Redirection
for legacy OS support. The options are 80
x24 or
80x25
.
AMT SOL Putty KeyPad
This feature selects Function Keys and KeyPad settings for Putty, which is a terminal
emulator designed for the Windows OS. The options are
VT100
, LINUX, XTERM
R6, SCO,
ESCN, and VT400.
AMT SOL Redirection After BIOS POST
Use this feature to enable or disable legacy Console Redirection after BIOS POST. When
the Bootloader option is selected, legacy Console Redirection is disabled before booting
the OS. When the Always Enable option is selected, legacy Console Redirection remains
enabled upon OS bootup. The options are
Always Enable
or Boo
tloader.
Redirection COM Port
This feature controls which COM port displays redirection of Legacy OS and legacy OpROM
messages. The options are
COM1
or SOL.