SuperWorkstation 5039C-T User's Manual
60
Aperture Size
This feature controls the graphics aperture size. For optimal performance, select the size
that matches the installed graphics card's size. The options are 128MB,
256MB
, 512MB,
1024MB, and 2048MB.
DVMT Pre-Allocated
This feature controls the DVMT 5.0 Pre-allocated graphics memory size to be used by
the internal grahics device. The options are 0M,
32M
, 64M, 4M, 8M, 12M, 16M, 20M,
24M, 28M, 36M, 40M, 44M, 48M, 52M, 56M, and 60M.
DVMT Total Gfx Mem
This feature controls the DVMT 5.0 total graphics size to be used by the internal graphics
device. The options are 128M,
256M
, and MAX.
VDD Enable
This feature enables VDD in the BIOS. The options are Disabled or
Enabled
.
PM Support
This feature enables PM support. The options are Disabled or
Enabled
.
PAVP Enable
This feature enables PAVP support. The options are Disabled or
Enabled
.
Cdynmax Clamping Enable
This feature enables Cdynmax Clamping. The options are Disabled or
Enabled
.
Graphics Clock Frequency
This feature controls the graphics clock frequency. Select the highest clock frequency
supported by the platform. The options are 337.5 Mhz, 450 Mhz, 540 Mhz,
675 Mhz
.
Skip CD Clock Init in S3 resume
When this feature is enabled, the system will skip full CD clock initialization during S3
Resume. The options are
Disabled
or Enabled.
DMI/OPI Configuration
DMI Link ASPM Control
This feature enables the control of Active State Power Management (ASPM) on the SA
side of the DMI Link. The options are Disabled or
L0sL1
.
DMI Extended Sync Control
This feature enables DMI Extended Synchronization support. The options are
Disabled
or Enabled.
DMI De-emphasis Control
This feature controls the DMI De-emphasis setting. The options are -6 dB or
-3.5 dB
.