Supermicro SuperServer 7088B-TR4FT, Руководство пользователя

Страница: 82 / 119

SuperServer 7088B-TR4FT User's Manual
82
to use UTF8 encoding to map Unicode characters into one or more bytes. The options
are ANSI, VT100,
VT100+ , and VT-UTF8.
Bits Per second
Use this item to set the transmission speed for a serial port used in Console Redirection.
Make sure that the same speed is used in the host computer and the client computer.
A lower transmission speed may be required for long and busy lines. The options are
9600, 19200, 38400, 57600 and
115200 (bits per second).
Data Bits
Use this item to set the data transmission size for Console Redirection. The options
are 7 (Bits) and
8 (Bits) .
Parity
A parity bit can be sent along with regular data bits to detect data transmission errors.
Select Even if the parity bit is set to 0, and the number of 1's in data bits is even.
Select Odd if the parity bit is set to 0, and the number of 1's in data bits is odd. Select
None if you do not want to send a parity bit with your data bits in transmission. Select
Mark to add a mark as a parity bit to be sent along with the data bits. Select Space
to add a Space as a parity bit to be sent with your data bits. The options are
None ,
Even, Odd, Mark and Space.
Stop Bits
A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for standard se-
rial data communication. Select 2 Stop Bits if slower devices are used. The options
are
1 and 2.
Flow Control
Use this item to set the flow control for Console Redirection to prevent data loss caused
by buffer overflow. Send a "Stop" signal to stop sending data when the receiving buffer
is full. Send a "Start" signal to start sending data when the receiving buffer is empty.
The options are
None and Hardware RTS/CTS.
VT-UTF8 Combo Key Support
Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100 terminals.
The options are
Enabled and Disabled.