Supermicro SuperServer 7088B-TR4FT, Руководство пользователя

Страница: 47 / 119

47
Chapter 3: Maintenance and Component Installation
3.5" HDDs
The 3.5" hard drives mount directly to the bottom of the storage module tray. See Figure 3-18
for the layout and assembly.
1. Remove the SATA power and data cables and unscrew the bracket (from the bottom of
the module) from the drive you wish to replace, then remove the drive.
2. Install a new hard drive into the same location, reconnect the power and data cables
and secure the drive to the bracket with the four screws.
3. Repeat the steps above as necessary.
4. With all drives installed in the module, replace the cover and slide the storage module
back into its bay in the chassis.
5. Depress the power button to boot up the system.
Figure 3-17. Installing/Removing 3.5" HDDs