Supermicro SuperServer 7088B-TR4FT, Руководство пользователя

Страница: 28 / 119

SuperServer 7088B-TR4FT User's Manual
28
Figure 3-1. Removing a CPU Module
Processor and Heatsink Installation
Follow the procedures in this section to install a processor (CPU) and heatsink to the
motherboard.
Notes:
•
The motherboard should be installed into the chassis first and the processor should be
installed into the CPU socket before you install a CPU heatsink.
•
If you bought a CPU separately, make sure that you use an Intel-certified multi-directional
heatsink only.
•
When receiving a motherboard without a processor pre-installed, make sure that the plastic
CPU socket cap is in place and none of the socket pins are bent; otherwise, contact your
retailer immediately.
•
Refer to the Supermicro website for updates on CPU support.
5. Put the module on a flat, non-conductive surface before removing or installling any
components.
4
2
3
3
2