Supermicro SuperServer 6014H-i, Руководство пользователя

Страница: 63 / 126

Chapter 6: Advanced Chassis Setup
6-5
Accessing the Drive Bays
IDE Drives: IDE drives may be installed and removed from the front of the
chassis without removing the chassis cover, however you will need to
power down the system when installing or removing IDE drives. Proceed to
the next page for instructions.
CD-ROM/Floppy Disk Drives: For installing/removing a CD-ROM or floppy disk
drive, you will need to power down the system and remove the top cover
of the chassis to gain access to the inside of the system. Proceed to the
"CD-ROM and Floppy Drive Installation" section later in this chapter for in-
structions.
Note: Only a "slim" type CD-ROM and floppy drive will fit into the 6014H-i2/
6014H-i/6014H-Xi.
Removing the Top Chassis Cover
First, release the retention screws that secure the server unit to the rack.
Grasp the two handles on either side and pull the unit straight out until it
locks (you will hear a "click"). Next, depress the two buttons on the top of
the chassis to release the top cover and at the same time, push the cover
away from you until it stops. You can then lift the top cover from the
chassis to gain full access to the inside of the server.