Supermicro SuperServer 6014H-i, Руководство пользователя

Страница: 53 / 126

Chapter 5: Advanced Serverboard Setup
5-19
3rd Power Supply Fail
Detect Header
Connect a cable from your power
supply to the header at JP9 to pro-
vide warning of power supply fail-
ure. The warning signal is passed
through the PWR_LED pin to indi-
cate on the control panel that a
power supply has failed. See the
table on the right for pin defini-
tions.
Power Fail
Pin Definitions (JP9)
Pin
Number
1
2
3
4
Definition
P/S 1 Fail Signal
P/S 2 Fail Signal
P/S 3 Fail Signal
Reset (from MB)
Note: This feature is only available when
using redundant Supermicro power supplies.
SMB (I
2
C) Connector
An I
2
C connector at J11 (located
near the battery on the X6DHR-iG2
and near the IPMI header on the
X6DHR-iG/X6DHR-XiG) monitors
the status of the PWR supply, the
fans and the system temperature.
SMB PWR
Pin Definitions (J27)
Pin #
1
2
3
4
5
Definition
Clock
SMB Data
N/A
N/A
N/A
Overheat LED (JOH1)
C o n n e c t a n L E D t o t h e J O H 1
h e a d e r t o p r o v i d e w a r n i n g o f
c h a s s i s o v e r h e a t i n g . S e e t h e
table on the right for pin defini-
tions.
Pin
Number
1
2
Definition
+5V
OH Active
Overheat LED
Pin Definitions (JOH1)
GLAN1/2 (Ethernet Ports)
Two gigabit Ethernet ports (desig-
nated GLAN1 and GLAN2) are lo-
cated on the I/O backplane. These
ports accept RJ45 type cables.