Supermicro SuperBlade Series, Руководство пользователя

Страница: 62 / 66

SuperBlade User’s Manual
B-4
B-4 Gigabit Ethernet Module LED Descriptions
SBM-GEM-001 Gigabit Ethernet module and SBM-GEM-002 Pass-through module
LEDs are described below in
Table B-5 .
Table B-5. Gigabit Ethernet Switch LED Indicators
LED State Description
Module Initiation OK
LED
( GEM-001 Module
Only )
Steady On
The GEM-001 GbE switch module is operational and has
passed the POST (Power-On Self-Test) with no critical faults.
Module Fault LED
(Red)
( GEM-001 Module
Only )
Steady On
When lit, this LED indicates that the GEM-001 GbE switch
module has either failed the POST or has detected an
operational fault within the module. When this LED is lit, the
fault LED on the blade enclosure will also turn on.
Link/Activity Ethernet
Port Status LED
Solid Green This indicates that the link is established, no activity
Blinking Green
This indicates that data is being transmitted (Tx) or received
(Rx)
Off This indicates that no link is established
Speed Ethernet Port
Status LED
(
GEM-001 Module
Only )
Amber Connection speed of the port is 1 Gb/sec
Green Connection speed of the port is 100 Mb/sec
Off Connection speed of the port is 10 Mb/sec