Supermicro SuperBlade Series, Руководство пользователя

Страница: 61 / 66

B-3
Appendix B: LED Descriptions
B-3 1/10 Gigabit Ethernet Module LED Descriptions
The SBM-GEM-X2C 1/10 Gps Ethernet module and SBM-XEM-002 10-Gb Ethernet
Pass-through Module
LEDs are described below in Table B-3 .
Table B-3. 1/10 GbE Switch and 10-GbE Pass-Through Module LED Indicators
LED State Description
RJ-45 Link/Activity
( GEM-X2C Module Only )
Green
Solid denotes link established, no activity. Blinking
denotes activity. Off indicates that no link is established.
RJ-45 Speed
( GEM-X2C Module Only )
Amber/Green/
Off
Amber denotes 1 Gbps speed.
Green denotes 100 Mbps speed.
Off denotes 10 Mbps speed.
“Initiation OK” LED Blue Denotes successful initiation/OK status when solidly lit.
Module Fault LED Red Denotes SBM-GEM-X2C module failure when solidly lit.
10G Port LEDs Green
Denotes activity for 10Gbps port when solidly lit. Blinking
green denotes data transmited (Tx) or received (Rx).
Stack ID LEDs
( GEM-X2C Module Only )
Green Denotes Stack ID activity as shown in Table B-4 below.
Table B-4. Stacking LED Activity (SBM-GEM-X2C)
Stack LED 4 Stack LED 3 Stack LED 2 Stack LED 1
Stacking Switch
Identifier
OFF OFF OFF ON 1
OFF OFF ON OFF 2
OFF OFF ON ON 3
OFF ON OFF OFF 4
OFF ON OFF ON 5
OFF ON ON OFF 6
OFF ON ON ON 7
ON OFF OFF OFF 8
ON OFF OFF ON 9
ON OFF ON OFF 10
ON OFF ON ON 11
ON ON OFF OFF 12
ON ON OFF ON 13
ON ON ON OFF 14
ON ON ON ON 15
OFF OFF OFF OFF 16 / Stacking Disabled.