34
Chapter 2: Installation and Setup
Removing a Hot-Swap Drive Carrier from the Chassis
1.
Press the release button on the drive carrier, which will extend the drive carrier handle.
2. Use the drive carrier handle to pull the drive out of the chassis.
Figure 2-4. Removing a Drive Carrier
Installing Drives
Figure 2-3. Logical Drive Numbers
1
2
2.6 Storage Drives
The blade has three 2.5" hot-swap storage drive bays. The drives are mounted in tool-less
drive carriers that simplify their removal from the chassis. These carriers also help promote
proper airflow. Carriers without drives must remain in the chassis for proper airflow.
For VROC configurations, refer to the
Note:
Enterprise level storage drives are recommended for use in Supermicro systems. For
information on recommended drives, visit the Supermicro website
.
1
2
0
