17
Chapter 2: Installation and Setup
Removing a Blade Unit from the Enclosure
A blade can be removed from the enclosure while other blades continue to operate.
Note:
When a blade is removed, please ensure the slot is covered with a dummy blade/
chassis to ensure the neighboring blade does not overheat.
Removing a Blade Unit from the Enclosure
1.
Power down the blade unit.
2. Push and hold the two locking levers out and away from each other.
3. Use the locking levers to pull the blade from the enclosure.
Figure 2-1. Blade Locking Levers
2.2 Installing or Removing the Blade Unit
Installing a Blade Unit into the Enclosure
1.
Pull the locking levers out and apart, and push the blade into its bay.
Caution
: Insert the
blade carefully so the rear connectors are not damaged.
2. As the blade is seated in the enclosure, push the levers into their locked position.
Locking Levers
