Supermicro PIIISEA, Руководство пользователя

Страница: 43 / 88

Chapter 2: Installation
2-15
Installation
2-9 Installing Software Drivers
After all the hardware has been installed you must install the software drivers.
The necessary drivers are all included on the Supermicro CD that came packaged
with your motherboard. After inserting this CD into your CDROM drive, the
display shown in Figure 2-5 should appear. (If this display does not appear, click
on the My Computer icon and then on the icon representing your CDROM drive.
Finally, double click on the S "Setup" icon.)
Figure 2-5. Driver/Tool Installation Display Screen
Click the icons showing a hand writing on paper to view the readme files
for each item. Click the tabs to the right of these
in order from top to
bottom
to install each item one at a time. After installing each item, you
must reboot the system before moving on to the next item on the
list. You should install everything here except for the SUPER Doctor utility,
which is optional. The Security and Graphics Drivers support multiple lan-
guages. Click the arrows to pull down a menu of choices. The bottom icon
with a CD on it allows you to view the entire contents of the CD.
Note: The memory size reported in the device manager may be less than
expected because some is used by the onboard graphics. Higher screen
resolutions will take up more of this memory.