Supermicro PIIISEA, Руководство пользователя

Страница: 26 / 88

S
UPER PIIISED/PIIISEA
Manual
1-18
Introduction
External Modem Ring-On
Wake-up events can be triggered by a device such as the external modem
ringing when the system is in the SoftOff state. Note that external modem
ring-on can only be used with an ATX 2.01 (or above) compliant power
supply.
Wake-On-LAN (WOL)
Wake-On-LAN is defined as the ability of a management application to re-
motely power up a computer that is powered off. Remote PC setup, up-
dates and asset tracking can occur after hours and on weekends so that
daily LAN traffic is kept to a minimum and users are not interrupted.
The motherboard has a 3-pin header (WOL) to connect to the 3-pin header
on a Network Interface Card (NIC) that has WOL capability. Note that Wake-
On-Lan can only be used with an ATX 2.01 (or above) compliant power
supply.
1-5 Power Supply
As with all computer products, a stable power source is necessary for
proper and reliable operation. It is even more important for processors that
have high CPU clock rates of 300 MHz and above.
The SUPER PIIISED/PIIISEA accommodates ATX power supplies. Although
most power supplies generally meet the specifications required by the CPU,
some are inadequate.
It is strongly recommended that you use a high quality power supply that
meets ATX power supply Specification 2.01 or above. Additionally, in areas
where noisy power transmission is present, you may choose to install a
line filter to shield the computer from noise. It is recommended that you also
install a power surge protector to help avoid problems caused by power
surges.
Note: To support the keyboard wake-up function, your power supply must
be ATX 2.01 or higher and must provide a minimum standby voltage of 720
mA.