Supermicro PDSBA, Руководство пользователя

Страница: 58 / 86

4-4
PDSBA-Q+/PDSBA+/PDSBA/PDSBE User's Manual
SATA Controller Mode
Select Compatible to allow the SATA and PATA drives to be automatically-detected
and be placed in the Legacy Mode by the BIOS. Select Enhanced to allow the
SATA and PATA drives to be to be automatically-detected and be placed in the
Native Mode.
Note : The Enhanced mode is supported by the Windows 2000 or a later
version of OS. Also, for SATA RAID confi guration instructions, please refer
to the Intel HostRAID Utility User Guide listed on our website (http://www.
supermicro.com/Product/motherboard).
Serial ATA (SATA) RAID Enable
Select Enable to enable Serial ATA RAID functions. (For the Windows OS environ-
ment, use the RAID driver if this feature is set to Enabled. When set to Enabled,
the item: ICH RAID Code Base will become available. If this item is set to Disabled,
the item-SATA AHCI Enable will be available.) The options are Enabled and Dis-
abled .
ICH RAID Code Base
Select Intel to enable the Intel SATA Host RAID Utility. Select Intel to use the Intel
HostRAID Utility. The default setting is Intel .
SATA AHCI
Select Enable to enable the function of Serial ATA Advanced Host Interface. (Take
caution when using this function. This feature is for advanced programmers only.
The Enhanced AHCI mode is available when the Windows XP-SP1 OS and the
IAA Driver is used.) The options are Enabled and Disabled .
IDE Primary Master/Slave, SATA Port3/SATA Port4 (SATA
Port3 and SATA Port4 are optional for OEM only.)
These settings allow the user to set the parameters of IDE Primary Master/Slave,
SATA Port 3 and SATA Port 4 connections. Hit <Enter> to activate the following
sub-menu screen for detailed options of the items. Set the correct confi gurations
accordingly. The items included in the sub-menu are:
Type
This feature allows the user to select the type of a drive specifi ed. Select Auto
to allow the BIOS to automatically set the capacity of the drive specifi ed. Enter
a number between 1 and 39 to select a predetermined type of this drive. Select
User to allow the user to enter the parameters of the drive installed at this
connection. Select CDROM if a CDROM drive is installed. Select ATAPI if a