Supermicro PDSBA, Руководство пользователя

Страница: 23 / 86

Chapter 2: Installation
2-3
Socket Key
(Socket Notch)
South Center Edge
North Center Edge
Load Lever
CPU in the CPU socket
Plastic cap is
released from
the load plate
if CPU properly
installed.
3. Use your thumb and your index fi nger
to hold the CPU at the North Center Edge
and the South Center Edge of the CPU.
4. Align CPU Pin1 (the CPU corner
marked with a triangle) against the socket
corner that is marked with a triangle
cutout.
5. Align the CPU key that is the semi-circle
cutout below a golden dot against the
socket key, the Notch on the same side of
the triangle cutout on the socket.
6. Once aligned, carefully lower the CPU
straight down to the socket. (Do not drop
the CPU on the socket nor move the CPU
horizontally or vertically. Do not rub the
CPU against the surface or against any
pins of the socket to avoid damage to the
CPU or the socket.)
7. With the CPU inside the socket, inspect
the four corners of the CPU to make sure
that the CPU is properly installed.
8. Use your thumb to gently push the load
lever down to the lever lock.
9. If the CPU is properly installed into
the socket, the plastic PnP cap will be
automatically released from the load plate
when the load lever is pushed in the
lever lock. Remove the PnP cap from the
motherboard.
Warning : Please save the plastic
PnP cap. The motherboard must
be shipped with the PnP cap
properly installed to protect the
CPU socket pins. Shipment with-
out the PnP cap properly installed
will cause damage to the socket
pins.)
!
CPU Key (semi-
circle cutout)
below the circle.
CPU Pin1
Corner with a
triangle cutout
golden dot