Supermicro PDSBA, Руководство пользователя

Страница: 22 / 86

2-2
PDSBA-Q+/PDSBA+/PDSBA/PDSBE User's Manual
2-3 Installing the CPU
When handling the processor package, avoid placing direct pressure on
the label area of the fan.
Notes:
Always connect the power cord last and always remove it before adding,
removing or changing any hardware components. Make sure that you install
the processor into the CPU LGA 775 socket before you install the CPU
heatsink.
Intel's LGA CPU package contains the CPU fan and heatsink assembly. If you
buy a CPU separately, make sure that you use only Intel-certifi ed multi-direc-
tional heatsink and fan.
The Intel LGA6 heatsink and fan comes with a push-pin design and no tool is
needed for installation.
Make sure to install the motherboard into the chassis before you install the
CPU heatsink and fan.
5. When purchasing an FC-LGA6 CPU or when receiving a motherboard with an
FC-LGA6 CPU pre-installed, make sure that the CPU plastic cap is in place and
none of the CPU pins are bent; otherwise, contact the retailer immediately.
6. Refer to the MB Features Section for more details on CPU support.
Installing the LGA6 Processor
1.
2.
3.
4.
1. Press the load lever to release
the load plate, which covers the CPU
socket, from its locking position.
Load Lever
2. Gently lift the load lever to open
the load plate.
PnP Cap on
top of the
Load Plate
Load Plate
(with PnP Cap
attached)
!