Supermicro K1048-RT, Руководство пользователя

Страница: 58 / 66

6-8
K1048-RT Microserver User's Manual
6-7 Power Supply
The system has two 400 Watt, redundant, hot-swap power supply modules. They
automatically sense the input voltage between 100v to 240v, and operate at that
voltage. An amber light on the power supply is illuminated when the power is
switched off. An green light indicates that the power supply is operating.
Replacement units can be ordered directly from Supermicro.
Replacing the Power Supply
1. Remove the AC power cord from the back of the power supply module.
2. Push the release tab on the rear of the power supply.
3. Pull the power supply out of the power supply bay using the handle.
4. Push the new power supply module into the power bay until it clicks.
5. Plug the AC power cord back into the module and power up the server.
Figure 6-7. Power Supply Modules