Supermicro K1048-RT, Руководство пользователя

Страница: 10 / 66

1-2
K1048-RT Microserver User's Manual
•
HDD Components:
Twelve (12) hot-swap 3.5" 4TB 5.9K RPM 64MB Cache, Ethernet HDD's
(HDD-T4000-ST4000NK000101)
•
One (1) rails set (MCP-290-00066-0N)
Note: For your system to work properly, please follow the links below to download
all necessary drivers/utilities and the user’s manual for your server.
•
Supermicro product manuals: http://www.supermicro.com/support/manuals/
•
Product drivers and utilities: ftp://ftp.supermicro.com
•
Product safety information:
http://super-dev/about/policies/safety_information.cfm
•
If you have any questions, please contact our support team at:
support@supermico.com
1-2 Server and Switch Features
At the heart of the K1048-RT server/switch lies dual Broadcom™ BMC-53347
10Gbps communication chips and system for communicating and servicing the
Ethernet hard-disk drives. Although these systems are mounted on a system
mainboard, this mainboard does not contain any CPUs, chipset or memory and
therefore will not be covered in this manual.
The sections below cover the main server and switch features of the K1048-RT
system (see Figure 1-1 for a block diagram of the chipset).
Microserver Storage System
The K1048-RT system ships fully integrated with twelve (12) dual ported 4TB
7200-rpm Ethernet drives (48TB). Redundant 1G Ethernet downstream connections
allow for resilient multi-path access to the key/value pair HTTP storage interface
built into each drive.
Ethernet Ports
Two Broadcom BMC-53347 10-Gigabit (1/10 Gbps) Ethernet Controllers are
integrated into the mainboard in the K1048-RT server. Additionally an IPMI LAN
port is provided. The system's AST2400BMC (Baseboard Management Control)
chip supports IPMI 2.0.