Supermicro 6048R-E1CR24L, Руководство пользователя

Страница: 56 / 142

5-8
S
UPER
S
TORAGE
S
YSTEM 6048R-E1CR24L User's Manual
Memory Support
The X10DRH-iT has 16 DIMM slots that can support up to 1 TB of Load Reduced
(LRDIMM) or 512 GB of Registered (RDIMM) ECC DDR4-2133/1866/1600 memory.
For best performance, install pairs of memory modules of the same type and speed.
Please refer to our website for any updates to supported memory. All channels will
run at the fastest common frequency.
DIMM Installation
Installing Memory Modules
1. Insert the desired number of DIMMs into the memory slots starting with P1-
DIMMA1. See the Memory Installation Tables on the following pages.
2. Insert each DIMM module vertically into its slot. Pay attention to the notch
along the bottom of the module to avoid installing incorrectly (see Figure 5-3).
3. Use your thumbs to gently press down on both ends of the DIMM module
until it snaps into place in the slot. Repeat for all modules.
4. Press the release tabs to the locked positions to secure the DIMM module
into the slot.
Caution: Exercise extreme care when installing or removing DIMM modules to prevent
any possible damage.
5-5 Installing Memory
Figure 5-4. DIMM Installation
Socket Key
Release Tab
Release Tab