Series
LTA/LTX/LTXR
Page
25 Nov./21/12
Installation
S
IDE
R
EFLECTORS
&
B
OTTOM
S
HIELDS
•
If used, install side shields (reflectors) and/or bottom shield as required. Refer to Figure 23 and
Figure 24 for details.
•
Side shields are 124" inches long. Fasten one side shield per reflector with #8 x 3/8" inch screws.
Use three side shield brackets per side shield. Space about 48" inches apart, refer to Figure 23.
Figure 23: Side Shield Overlap
Reflector
Hanger
Side Reflector Bracket
(approx. 48" apart)
#8 x 3/8" Screw
#8 x 3/8" Screw
Reflector
#8 x 3/8" Screws
Notch the Side Reflector
for Reflector Brackets
and Hangers
Side Reflector
Reflector
Side Reflector
Side Reflector
Bracket
Screws to be installed from inside of Side Reflector.
Install screws on one end of the Retainer Clip to allow movement.
Use the hole as a guide to position Side Reflector.
The Side Reflector edge must be visible through
the hole at room temperature.
Side Reflector
Retainer Clip
