Superior Radiant LA series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 15 / 33

Series-LA/LX/LXR Page 13 6/15/2010
Installation Sequence
•
Install the tube and reflector support hanger on the chain with “S-hooks”.
•
Place the first (flanged, aluminized) tube in the first two hangers. Be sure the flange is toward the
intended burner location. The other end of the tube should have the first coupling already loosely
fitted. Tighten the cradle loops of the first hanger with the “J-Bolt” found in the burner box to
snugly hold the combustion tube from rotating.
Figure 10
Note: For all coupling joints, ensure that the tube joint is in the center of the coupling length,
and that the overlap joint of the coupling is above the centerline of the tube. Also ensure that
the weld seam on ALL tubes is facing down.
Figure 11
Installation of Reflector Hangers
and "J" Bolt
Place Tube in the
Reflector Hanger
as shown.
Reflector Hanger
Install "J" Bolt at the
First Hanger Only.
Installation of Tube Coupling
When Installing, Orient
Band Clamp Lock Bolts
to Top, at 10 o'clock
Or 2 o'clock Position to
Avoid Contact with the
Reflector.