SuperiorFireplaces.us.com
900719-00B
20
INSTALLATION
Continued
EMBER PLACEMENT
WARNING: Do not use
any other ember material not
supplied with this unit.
WARNING: Do not operate
unit without ember material
correctly in place as shown in
Figures 40 & 41. Do NOT place
ember material anywhere else
on the unit. Use only ember ma-
terial supplied with unit. Exces-
sive or incorrectly placed ember
material may produce carbon
monoxide or soot.
1.
Ember Chunk Placement.
The VRT4036
series burner systems include three
ember chunks that are designed to
fi
t
over shoulder screws on the ember pan
burner. The bottom of each ember chunk
has a hole for securing the ember chunk
in place when it is placed over a shoulder
screw. Place the ember chunks as shown
in
Figure 39
by placing the ember chunk
with the number "1" on the left, "2" in the
center, and "3" on the right. These num-
bers are embossed on the back of each
piece for identi
fi
cation purposes. Please
note that VRT4032 series burner systems
do not
include ember chunks.
2. Two ember materials are supplied with
this log set. Platinum Bright Embers give
a bright glow appearing as hot coals.
Should embers need replacing, see
Parts
,
Page 41
.
Platinum Bright Ember placement.
Add
embers to front,
fl
at burner. Gently remove
embers from bag. Separate pieces of
ember material and place on surface of
fl
at burner just behind horizontal ports as
shown in
Figure 40
.
Glowing embers (rockwool) placement.
Place glowing embers material on front
fl
at burner in areas away from ports as
shown in
Figure 41
.
3.
DO NOT place volcanic stone or addi-
tional logs on front burner or on logs.
Placing any material on unit other than
ember material on front burner may result
Figure 41 - Placement of Glowing Embers (shown with Platinum Bright Embers)
Figure 40 - Platinum Bright Embers
Ember Material
Glowing Embers
Figure 39 - Ember Chunk Placement VRT4036 Series
Ember Chunk #1
Ember Chunk #2
Ember Chunk #3
Flat Front Burner
Flat Front Burner
