Sunwave CrossFire HP, Руководство пользователя

Страница: 57 / 92

CrossFire HP – All-Digital Transport System
User Guide
© SUNWAVE COMMUNICATIONS LIMITED 2015 57 Revision 05
6.2.1. 6.2.1. 6.2.1. 6.2.1. Inspecting Inspecting Inspecting Inspecting the the the the Packing Packing Packing Packing Container Container Container Container
Handle the packing container carefully. Inspect the packing container immediately on arrival at the installation site
to verify that no obvious damage occurred during shipment. Ensure that the container is sound and that the waterproof
and vibration warning notices are still obvious.
If any damage is observed, notify SUNWAVE immediately. Do not open or unpack the container until SUNWAVE
personnel have inspected it.
A SUNWAVE engineering technician will attend the installation site to inspect and unpack the shipment with the
customer. The technician will complete a shipment arrival and inspection report.
6.2.2.
6.2.2. 6.2.2.
6.2.2. Unpacking
Unpacking Unpacking
Unpacking the
the the
the Device
Device Device
Device
If the container appears to be in satisfactory condition, perform the following procedures to unpack the device:
1. Ensure both user and supplier representatives are in attendance during shipment inspection.
2. Confirm where the device is to be stored.
3. Ensure procedures are in place to handle the device and other equipment properly, after it has been
unpacked and inspected.
4. Ensure the following tools are available to unpack the shipment: hammer, paper cutter and crow bar.
5. Open the packing container carefully. The device is contained in a protective package inside the
packing container; however, caution is still necessary so as not to damage the internal package and device.
6. Remove the internal package from the packing container.
7. Unpack the device from the internal package carefully.
6.2.3.
6.2.3. 6.2.3.
6.2.3. Verifying
Verifying Verifying
Verifying the
the the
the Contents
Contents Contents
Contents
To verify the contents of the package:
1. Verify that the contents and quantities agree with the Delivery Packing List.
2. Check the device model against the Delivery Packing List.
3. Notify
SUNWAVE
immediately if any discrepancies are discovered, to verify whether the complete
and correct shipment has been received.
6.2.4.
6.2.4.
6.2.4. 6.2.4. Inspecting
Inspecting
Inspecting Inspecting the
the
the the Device
Device
Device Device
After unpacking the device, place the device on solid ground and check the following to ensure the device has not
been damaged:
1. Inspect the device’s appearance, overall dimensions and weight.