CrossFire HP – All-Digital Transport System
User Guide
© SUNWAVE COMMUNICATIONS LIMITED 2015
75
Revision 05
Connection & Query Status
Alarm Parameter Configuration
Com pletion
Figure
Figure
Figure
Figure 7
777---- 2222 EU
EU
EU
EU Debugging
Debugging
Debugging
Debugging Procedures
Procedures
Procedures
Procedures
7.1.
7.1.
7.1.
7.1. Network
Network
Network
Network Management
Management
Management
Management System
System
System
System Setup
Setup
Setup
Setup for
for
for
for SNMP
SNMP
SNMP
SNMP
The site number must be set using the WebOMT on the Master AU before connecting to the network management
system (NMS). The NMS should identify devices by their unique site number. Network parameters also need to be set up
for the specific network. If the NMS supports the SNMP protocol, set
Protocol
Protocol
Protocol
Protocol Select
Select
Select
Select
to “SNMP” and configure related
parameters such as the
Trap
Trap
Trap
Trap IP
IP
IP
IP Addr
Addr
Addr
Addr
,
Trap
Trap
Trap
Trap Port
Port
Port
Port
,
Subnet
Subnet
Subnet
Subnet Mask
Mask
Mask
Mask
,
Default
Default
Default
Default Gateway
Gateway
Gateway
Gateway
, etc. as shown in Table 7. If the NMS
supports the SUNWAVE proprietary protocol, set
Protocol
Protocol
Protocol
Protocol Select
Select
Select
Select
to “TCP/IP” and configure the corresponding
parameters as shown in Table 6.
The remote FTP server parameters also need to be set up if remote software upgrades are supported. These
parameters are set in the
Engineering
Engineering
Engineering
Engineering
tab ―>
User
User
User
User Para
Para
Para
Para
sub-tab in the WebOMT. See Figure 7- 3 for details.
