Order Unit: P/N 900489-XXXX, Specify frequency
Cut-Sheet P/N 750191-0001 Rev. E 03/15
Specifications Subject to Change Without Notice
Digitize Inc. ■ 158 Edison Road ■ Lake Hopatcong ■ New Jersey ■ 07849
Tel: (973)663-1011 Fax: (973)663-4333 ■ Website: http://www.digitize-inc.com
FirstWhen seconds count! ™
DIPOLE-LO/DIPOLE-HI EXTERNAL MOUNT ANTENNA
25-100 Mhz/108-222 Mhz
Features
•
Available in 25-100 Mhz or 108-
222 Mhz
•
Aircraft aluminum construction
•
PL-259 Coax connector at
antenna base
•
Antenna is cut to user frequency
•
Lightning protection is provided
by gap inside the insulator
•
Operates with any transmitter
requiring a 50 Ohm load.
Additional Material Required
1. Support pipe, threaded on one
end. Minimum length is 5 ft.
(dipole lo) or 3.5 ft. (dipole hi).
2. Lightning arrestor enclosure for
LAC-2, ground wire and ground
rod.
3. Two lengths of RG-8/U coaxial
cable with PL-259 connectors.
(First length is from antenna to
lightning arrestor, second length
is from arrestor to transmitter or
receiver.) AUHF to BNC adapter
is required for some transmitters.
4. Antenna support.
5. Noalox or equivalent electrical
grease.
6. Electrical conduit, clamps, and
miscellaneous hardware based
on site requirements.
Product Information
The Dipole-Lo and Dipole-Hi antennas are
unity gain half wave dipole antennas. They
are constructed of aircraft aluminum to help
prevent corrosion.
The antennas are available in 50-100 Mhz
range and 108-174 Mhz range. Antenna
can be mounted on poles, roofs, or walls
with the proper field-supplied mounting
hardware. The antenna must be installed
with
proper
grounding
for
lightning
protection.
Please
see
reverse
for
mounting
instructions.
