SRC-3810 User’s Manual
Problem
Solution
You see “ERROR” display
on the LCD during the
learning procedure.
Make sure you hold the other
remote’s button down for about 2
seconds.
Make sure you did not program
more than one remote for a given
device.
Make sure the two remotes are not
too close or too far apart and are
aiming directly at each other - keep
apart between 2~4 inches (5~10cm).
You see “ERROR” display
during operation.
The button that you pressed has not
been taught.
Learn the button using the learning
procedure (page 18).
Your VCR will not record.
As a safety feature on SRC-3810, you
must press the REC key for 2
seconds.
Problems changing
channels.
If your original remote requires the
ENTER
key to be pressed after a
channel is selected, press the
ENTER
key to select the channel.
Macro does not work.
Be sure to aim the SRC-3810 at the
devices while the macro commands
are being sent.
Macro was not properly set up.
Repeat macro set-up procedure
(page 25).
50
