SRC-3810 User’s Manual
Debugging Device Codes
Use this procedure if the SRC-3810 is unable to
recognize the infrared signals from another remote
control.
Once you have collected unrecognizable codes, you
can use the optional SLC–2080 link cable (see
Appendix B - Accessories
on page 48 for more info) to
upload the unrecognized codes to your personal
computer and then email them to Sunwave for
analysis. Sunwave can then update the system
firmware and send you an updated version that will
recognize the codes.
Sunwave’s service email address is:
All unrecognized codes should be sent to this address.
Every time you enter DEBUG mode, the SRC-3810
replaces previously stored unrecognized codes with
new ones. If you have more than one remote that is
not programmable, upload the first remote’s
unrecognized codes and then gather the second
remote's unrecognized codes.
Set up the LCD display before using this function. See
LCD Layout
on page 24.
22
