Sunwave Tech. SRC-3000, Руководство пользователя

Страница: 16 / 41

SRC-3000 User’s Manual
14
Code and Learn Setting Key
Press (Code setup key) for three seconds to enter the
confirmation screen. Then press the four numerical keys in
any sequence to enter the selection screen. Press and
to scroll through the following options.
• Code: Use this option to automatically configure all
keys on the SRC-3000 for use with a specific
manufacturer’s model number. This option is the
fastest way to program the SRC-3000 but requires that
your device be located in the Pre-programmed Code
List that was bundled with the SRC-3000. Refer to the
supplied code list. Some newer or less-common
devices may not be pre-programmed and their codes
must be learned using the Learning Function by the
SRC-3000.
• Learn: Use this option to directly learn the infrared
signals from another remote control. This option is
perfect for newer or less common devices, or if a
certain key does not perform the desired function
after using the CODE option. However, if you come
across the problem that the SRC-3000 cannot learn
your device codes, refer to “Troubleshooting” on page
36 or contact the dealer.