Troubleshooting
Tables
37
Problem
Solution
You cannot operate a device
even after teaching the
device using the learning
function.
Make sure that your SRC
3000 has correctly learned
the target device’s remote
control code (page 19).
Delete the device data
from the SRC-3000 and
carry out the learning
function again (page 19).
Make sure you did not
program more than one
remote for a given device.
You see “ERROR” display on
the LCD during the learning
procedure.
Make sure you hold the
target remote’s key till the
screen displays Ok or Error
on the screen.
Make sure the two remotes
are not too close or too far
apart - keep them about
2~4 inches (5~10 cm) apart,
and your device remote
control is aiming directly at
the SRC-3000’s learning
eye.
You see “ERROR” displayed
during operation.
The key that you pressed
has not been taught.
Teach the key using the
learning procedure (page
18).
Your VCR will not record.
As a safety feature on the
SRC-3000, you must press
the REC key for two
seconds.
Содержание SRC-3000
Страница 1: ...SRC 3000 Touch Screen Remote Control User s Manual 030821...
Страница 2: ......
