Using
Code Learning Mode
19
Learning from Another Remote Control
Before using learning mode, set both remotes on a flat
surface so that the target device’s remote control IR is
pointed at the SRC-3000’s learning eye, which is located at
the bottom of the unit. Keep a distance of 2-4 inches (5-10
cm).
1.
Press
for three seconds to
enter the confirmation screen.
Refer to page 10.
2.
Press and to scroll through the
options.
3.
Select
and press
.
4.
Select a device (for example TV).
5.
Point the target device’s remote control at the SRC-3000
learning eye located at the base of the unit (see Figure 1:
Front View). The SRC-3000 sequentially displays PAGE 1
and PAGE 2 and the keys to be pressed to lead you
through the operation.
6.
The blinking frame denotes the key being learned. Press
the corresponding keys on the target device’s remote
control till it shows
, the next key will blink and the
remote code is recorded into the selected device key. If it
shows
please learn again.
Содержание SRC-3000
Страница 1: ...SRC 3000 Touch Screen Remote Control User s Manual 030821...
Страница 2: ......
