SUNWARD SWL 2021 Series, Руководство оператора

Страница: 72 / 91

SWL2820 Operator’s Manual
71

Do not proceed to change the engine oil filter just after stopping the engine, since
the oil is still hot. Wait for a while until the oil cool down.

Oil filters are considered special waste. It has to be collected following the current
environment regulation.

Use special spanner in order to ensure not damage the filter.
5.5.4.8 CHANGING THE FUEL FILTER

Take into consideration that the fuel is flammable. Take care by handling with fuel.

Use always the fuel filters recommended in this manual.
Proceed as follow for changing the fuel filter located in the engine compartment (See picture
below):
1) Remove the fuel filter.
2) Clean the gasket surface of filter head with a lint-free cloth.
3) Discard the O-ring.
4) Install a new O-ring.
5) Fill the new filter with clean fuel, and lubricate the O-ring seal with clean
lubricating engine oil.
6) Install the new filter.

Make sure you use the filter recommended in this manual.

Do not proceed changing the fuel filter just after stopping the engine, since the
engine body is still hot.

Oil filters are considered special waste. It has to be collected following the current
environment regulation.

Use proper tools only in order to avoid damaging the filter.
5.5.4.9 CHECKING THE NUT TORQUE OF THE HYDARULIC MOTOR AND THE
HUB HOLDING TO THE CHASSIS

For the operator’s security check the screw that hold the hydraulic motor to the chassis.
Take as reference the following driving torque given in the following table: