SUNWARD SWL 2021 Series, Руководство оператора

Страница: 56 / 91

SWL2820 Operator’s Manual
55

When connecting auxiliary equipment, make sure the pedal is in the neutral
position and the safety retainer is engaged.

About each auxiliary operation instruction, please refer to related auxiliary
operation manual.
4.17 HIGH FLOW SYSTEM
It’s useful with such attachments that need great flow rate.
Before use it:
Connect the high flow pipes;
Push the button on the right joystick supporting box.
4.18 MAXIMUM IMMERSION IN A FLUID

The machine could be damaged if water comes into the engine compartment.

Try to not immerse the machine in fluids
deeper than 200 mm.

Make sure the bottom surface is strong enough.

Clean the machine and grease the articulation
after immerse the machine.
4.19 MOVE THE MACHINE WITH
TOWING HOOK.
Only use cable strong enough to remove the machine.
Release the parking brake before towing.
Never tow the machine for long distance.
When the machine is stuck in mud or out of order, we
need other equipments to remove the machine. Use a
cable strong enough trough the towing hook in the rear side of the machine to remove the
machine.
4.20 STARTING THE MACHINE WITH BOOSTER CABLES
Read carefully the safety regulations before perform starting the machine with booster cables.
Always follow with the safety regulations strictly.

Make sure the voltages of the two machines are same and the aiding battery is with
greater or at least same capacity.

Make sure the booster cables are enough for the current and with good condition.

When connecting the cables, avoid any contact between the two terminals (+ and -).
For connecting the booster cables and starting the machine, proceed as follow: