background image

SWL2820 Operator’s Manual 

21 

 

Damaged hoses could be extremely dangerous and could cause serious injuries. Change 
the damaged hoses and connections as soon as possible. 

 

If you are hit by a jet of high-pressure oil and suffer injury to your skin and eyes, wash 
your skin and eyes with clean water and consult a doctor immediately.  

 

2.5.5

 

PREVENTION ON THE STARTER AND ALTERNATOR 

 

Before doing any check on the electric circuit, disconnect the battery in order to cut off 
the current.  

 

If some electrical welding has to be done on the machine, it is necessary to disconnect 
the battery and also the alternator.  

 

Never try to start the engine by manipulating the connexions of the starter. It will cause 
sudden machine move. It is very dangerous for the operators. 

2.5.6

 

PREVENTION OF BATTERY HAZARD  

Battery electrolyte contains sulphuric acid and generates flammable hydrogen gas. The 
sulphuric acid is extremely harmful to your body.  

 

 

Solutions for the accidents:  

1)

 

If the electrolyte contact your eyes flush 
them immediately with plenty water and 
contact a doctor immediately. Acid could 
cause blindness.  

2)

 

If some electrolyte contact with your skin, 
wash immediately with plenty water.  

3)

 

If accidentally you ingest some acid drink 
a large quantity of milk, eaten eggs or 
vegetable oil and call immediately a 
doctor.  

Please always follow with the following precautions: 

 

Always wear goggles and gloves when you are 
working with the battery.  

 

Stop the engine and remove the key before 
working on the battery.  

 

Never smoke and use any flame near the battery.  

WRONG 

RIGHT 

CONNECT 

Содержание SWL 2021 Series




























































































Отзывы: