SUNWARD SWE215F-5, Руководство по эксплуатации и техническому обслуживанию, Страница: 155 / 182

OPERATION & MAINTENANCE MANUAL SWE215F
148
against the back of the pin), use hammer to knock out
pin (1), then remove bucket teeth (2).

Clean mounting surface, place new bucket teeth (2) to
teeth holder, push pin (1) partly into it by hand, then
use hammer to knock in lock pin to position it to
bucket holder.
4.5.4 Every 50 Hours Maintenance
Carry out the following maintenance operation
every 50 hours.
4.5.4.1 Checking and Adjusting Track Tension
For details, please refer to chapter 4.5.3.4.
4.5.4.2 Draining Water and Sediment from Water Separator
For details, please refer to chapter 4.5.2.2.
4.5.5 Every 100 Hours Maintenance
When the machine works for every 500 hours, take the
maintenance as specified in this chapter and carry out
maintenance of every 50 hours at the same time.
4.5.5.1 Checking and Adjusting Fan Belt Tension
For details, please refer to chapter 4.5.2.7.
4.5.6 Every 250 Hours Maintenance
When machine works for every 250 hours, take out
maintenance as specified in this chapter and carry out 50
hours maintenance at the same time.
4.5.6.1 Checking Swing Reduction Gear Oil Level

Stop the machine at level ground.

Shut auto-idling switch to run the engine unloaded at
low temperature for 5 minutes.