SUNWARD SWE215F-5 Скачать руководство пользователя страница 103

Страница: 103 / 182

OPERATION & MAINTENANCE MANUAL SWE215F

allowed to operate. If no, find out the problem and do

not operate until the problem is cleared. You could

stop the engine to help find the problem if necessary.

3.4.6 New Machine Running-in

Note



All machines have a running-in period. The running-in period of our machines is the first 50

hours.



How well does the machine run during running-in period have direct effect on the machine

performance in the future in terms of use effect and service life. Please follow the rules

specified in this manual.



After starting the engine, do not attempt any operation; allow it to idle for 15 seconds.



After idle running, attempt all digging, swing action without load at idle speed for 5 minutes.



Do not operate with heavy load or at high speed.



Before stopping the engine, do keep it running at idle for longer than 2 minutes.



Do not start, accelerate, steer, travel and attempt all other actions sharply, except in emergency.

Содержание SWE215F-5























































































































































































Результаты поиска

Содержание SWE215F-5

Отзывы:

SUNWARD SWE215F-5, Руководство по эксплуатации и техническому обслуживанию, Страница: 103 / 182

Результаты поиска

Содержание SWE215F-5

Отзывы: