SunTech ADC ADview 9000BP, Руководство пользователя, Страница: 40 / 80

29
MEASURING OXYGEN SATURATION WITH THE MEASURING OXYGEN SATURATION WITH THE MEASURING OXYGEN SATURATION WITH THE MEASURING OXYGEN SATURATION WITH THE
ADVIEW ADVIEW ADVIEW ADVIEW
The
ADview
optional pulse oximeter module measures functional oxygen saturation ranging
from 40% to 100%. A signal strength display assists the clinician in the proper placement of
the sensor.
The
ADview
is a spot check device and is not used for patient monitoring.
Therefore, there are no SpO
2
alarms.
Steps for measuring functional oxygen saturation:
•
Prepping the patient and affixing the sensor
•
Taking a reading
Prepping th Prepping th Prepping th Prepping the Patient e Patient e Patient e Patient
Selecting the Right Sensor
Your choice of sensor is affected by many factors including:
•
Patient’s body weight
•
Patient activity
•
Infection control concerns
For most patients greater than 30kg, use an adult sensor; for patients 10-
50kg, a pediatric sensor may provide better fit.
Protecting Your Pulse Oximetry Sensors
In addition to the safety instructions for your
ADview
, here are some additional tips on caring
for the sensor of the optional pulse oximetry module:
•
To prevent damage, do not autoclave or immerse the sensor in liquid.
•
For peak performance and accurate measurements, do not expose the sensor to
excessive ambient light, electromagnetic interference, dysfunctional hemoglobin, low
perfusion, intravascular dyes, finger nail polish and long or artificial finger nails.
•
Do not use a damaged sensor as it may cause patient injury or equipment failure.
•
The use of this sensor is contraindicated in patients with allergies to adhesive tape.