SunStar SSP-WE/3.5, Инструкция по эксплуатации

Страница: 81 / 158

81
This deletes the selected configuration data. If the configuration data contains the
sewing data, you can select to delete either only the configuration data, or the
entire configuration, or delete both configuration and sewing data. If not, the
configuration data will be deleted immediately.
· ·
Configuration Data Deletion
①
Click
“
Configuration Date Deletion
”
, then it gets
concaved.
②
Click configuration data to delete.
③
Click the right button to display
“
Configuration
Delete Dialog
”
. There is the radio button to
select two methods: One is to delete all of
sewing and configuration data, another to delete
just configuration data.
④
Click the radio button of configuration data.
⑤
Click
“
OK
”
. Configuration is deleted except
sewing data.
It should be considered that Arc Stitching was an attribute of sewing data
that existed in previous Arc configuration data. However, after deleting
configuration data, it is changed into Point Stitching.
This is used to re-create sewing data reversely.
· ·
Reverse Stitching
■ ■
Sewing Tool
①
Click configuration data.
②
Click a reverse Stitching function button to displ-
ay
“
Reverse Stitch Dialog
”
. As shown in the
figure, there are various input boxes: First box
to set up the number of reverse creations, and
Second boxes to input upon clicking
.
That is, it is used to convert Reverse Stitch
Type into Regular Stitch. And the inter-stitching
distance is inputted into the box. Second input
box is applied to set up Zigzag Stitch
Type. Each box is to set up the distance and
width between stitches. Finally two radio
buttons is to determine the start direction of
Zigzag. The current dialog box is set up default.