SunStar SSP-WE/3.5, Инструкция по эксплуатации

Страница: 34 / 158

34
Sewing Data
Sewing data can be divided into three types: Point Stitching, Sewing
Data created based on configuration data, and Mechanical Control
Command Data to be applied relating to the created sewing data.
Point Stitching
Stitching to be
created with
configuration data
Machine command
control stitching
First, Sewing Data, which you can input stitch by stitch in person, is Point Stitching as shown
in the above picture. Second, Sewing Data created based on configura-tion data creates a
Spline of configuration data as shown in the above picture and creates zigzag stitching of
sewing data with the Spline. Third, Mechanical Control Commands indicate commands such
as the second origin, temporary stop of machine, thread trimm-ing at any position of sewing
data, and clamp inversion/noninversion. These are indicated with text:
“
Stop
”
for temporary
stop of machine,
“
Clamp-L /Clamp-R
”
for clamp inversio-n/non-inversion, and
“
Trim
”
for
thread trimming. Although there is not in the above picture, the second origin is indicated with
“
2-Origin
”
.
The sewing data joint is generally indicated with a black cross.