Sunrise Medical Pulse 5BC, Руководство пользователя

Страница: 40 / 44

119832Rev. G 40
Q UI C KI E PU LS E
A P P END IX
TABLE 1
Emissions Test Compliance Electromagnetic environment
Ͳ
guidance
RF emissions
CISPR 11
Group 1
The product uses RF energy only for its internal function. Therefore, its RF emissions are
very low and are not likely to cause any interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
Harmonic emissions
IEC 61000 Ͳ 3 Ͳ 2
Not Applicable
Voltage fluctuations/flicker
emissions
IEC
61000 Ͳ 3 Ͳ 3
Not Applicable
The product is intended for use in the electromagnetic environment specified below. The user of the product should assure that it is used in such an
environment.
Guidance and Manufacturer's Declaration - Electromagnetic Emissions
The product is suitable for use in all establishments other than domestic and those
directly connected to the public low Ͳ voltage power supply network that supplies
buildings used for domestic purposes.
The product should be set up and used per instructions in this manual to insure
electromagnetic emissions are at acceptable levels.
TABLE 2
Immunity Test IEC 60601 test level Compliance Level Electromagnetic Environment Ͳ Guidance
Electrostatic discharge (ESD)
IEC 61000 Ͳ 4 Ͳ 2
± 6kV Contact / ± kV Air ± 6kV Contact / ± kV Air Floors should be wood, concrete or ceramic
tile. If floors are covered with synthetic
material, the relative humidity should be at
least 30%.
Electrical fast transient/burst
IEC 61000 Ͳ 4 Ͳ 2
Not Applicable Not Applicable
Surge
IEC
61000 Ͳ 4 Ͳ 5
Not Applicable Not Applicable
Voltage dips, short interruptions
and voltage variations on power
supply input lines
IEC 61000
Ͳ
4
Ͳ
11
Not Applicable Not Applicable
Power frequency (50/60Hz)
magnetic field
IEC 61000 Ͳ 4 Ͳ 8
30 A/m, 50&60 Hz, 3 axes 30 A/m, 50&60 Hz, 3 axes Power frequency magnetic fields should be
at levels characteristic of a typical location
in a typical commercial or hospital
environment.
The product is intended for use in the electromagnetic environment specified below. The user of the product should assure that it is used in such an
environment.
Guidance and Manufacturers Declaration - Electromagnetic Immunity